Enphase Consumption Levels – Your Complete Guide

Last Updated on July 12th, 2023

We may earn commissions for purchases made through links on our site. Learn more on our about us page.

Enphase is a great solar system that provides power to your home. It helps you to keep power even when the grid goes down, or there’s a particularly bad storm, and it can lower your energy costs. 

Though the system is expensive, it can help you save money in the long run as it allows you to offset a large portion of your energy bill. 

To truly be cost-effective, though, you need to know not only how much energy your Enphase system is producing but how much power you are consuming daily. To do this, you would need a monitoring system. 

These are cheap parts but can be costly to install. However, if you use the system right, it can be well worth it. 

Keep reading to learn more about the cost of an Enphase monitoring system, as well as if it is possible to do it yourself, and what you can expect. 

Solar panels on the roof of a house - Enphase Consumption Levels

How Much Does Enphase Consumption Monitoring Cost?

This is a complicated question. Though on the surface, it may appear that the monitoring tool is relatively cheap, usually under $50, installation can be pretty high. 

Unfortunately, many companies have created a situation where if anyone but them installs the monitoring equipment, the warranty on any Enphase product and installation they provide will be voided. 

This allows them to raise the prices for installation quite high. 

 

How Much Do You Need to Pay for Installing Enphase Consumption Monitoring Cost?

The installation itself isn’t very costly or time-consuming. However, since installation is required by the people who originally installed your system, they tend to charge high prices. 

While not every company is this way, most people can expect to pay anywhere between $400 and $600. 

Based on the services, however, about $100 to $200 is what should traditionally be expected, but it is rare to get this low of a bill. This is especially true in smaller areas, where there aren’t a lot of options for installers. 

Also, the prices may be much higher if your system is outdated and you need an upgrade so it can support a monitoring system. If this is the case, or something needs to be replaced, you can then expect to pay somewhere near $3000.  

Can You Reduce Cost if You Install Enphase Consumption Monitoring on Your Own?

Absolutely. This would reduce your cost by several hundred dollars. It also shouldn’t take too long, just a few hours of your time as you watch videos and make sure you are doing things correctly. 

However, you have to determine if the loss of your warranty is worth it. 

Also, it is important to note that installing these sensors can be dangerous. You are working with electricity, and solar panels aren’t just something you can turn off. 

Unless you have experience working with electrical and feel confident that you know what you are doing, it may be worth hiring someone to help. 

While it may not cut costs, it can save you an injury, a trip to the hospital, or damage to your system or home. 

 

What Should You Pay Attention to For Enphase Consumption Monitoring Cost?

If you are early on into the process of getting an Enphase system, or just set it up, look at your installer and their prices carefully. 

For example, some companies charge a discounted rate for installing the monitoring system early on in the process rather than after the rest of the installation is complete. 

This can save you up to 50% of what it would cost you to set it up later. Since it is well worth getting a monitoring system for Enphase consumption, it is worth considering getting it right away. 

Otherwise, check with your company and their warranty. See if your company will install it for cheap or if another company can install it without voiding your warranty. 

Keep in mind that Enphase generally has its own warranty, so it is mostly the installation warranty you have to worry about. 

Some counties throughout the US do install them with the software, so double-check that with your installers as well, as you might not have to pay nearly as much as you think. 

While this isn’t the case everywhere, it seems to be more and more common now with trustworthy and fair companies. 

 

When Should You Install Enphase Consumption Monitoring to Save Cost?

Almost every user says it is well worth getting the Enphase consumption monitoring meters right away. Since they allow you to see how much solar you are using, you can adjust your lifestyle and power accordingly. 

Without them, you are only able to see how much solar your system is producing but can’t see how your household is using this power. For example, you may be using a small amount of it, going over the production from your system, or doing great. 

However, there is just no way to know without the monitoring system. This is why, even if you are being charged $600, it can be well worth the cost immediately. Because in the long run, you will save a lot of money as long as you do it right. 

 

Final Thoughts on Enphase Consumption

The Enphase monitoring system is worth it, without a doubt, as long as you are going to use it. It helps you be more aware of your energy draws, and you can adjust your lifestyle to fit your solar system and save money a lot easier. 

Unfortunately, it can be rather costly to install, and not all installers and companies are trustworthy. This can lead to some rather high costs for something that isn’t so hard to install yourself and a voided warranty if you do try to save costs. 

 

Leave a comment

Leave a Reply

Image